Husqvarna 966765403 ユーザーズマニュアル

ページ / 32
English
 – 15
STARTING AND STOPPING
Starting and stopping
Starting
Primer bulb: Press the primer bulb repeatedly until fuel 
begins to fill the bulb. The bulb need not be completely filled.
Choke: Set the choke control in the choke position.
Hold the body of the machine on the ground using your left 
hand (CAUTION! Not with your foot!). Grip the starter handle, 
slowly pull out the cord with your right hand until you feel 
some resistance (the starter pawls grip), now quickly and 
powerfully pull the cord. Never wrap the starter cord around 
your hand
Repeat pulling the cord until the engine starts. When the 
engine starts. return choke control to run position and apply 
full throttle; the throttle will automatically disengage from the 
start setting.
CAUTION!  Do not pull the starter cord all the way out and do 
not let go of the starter handle when the cord is fully extended. 
This can damage the machine.
CAUTION! 
Do not put any part of your body in marked area. Contact can 
result in burns to the skin, or electrical shock if the spark plug 
cap has been damaged. Always use gloves. Do not use a 
machine with damaged spark plug cap.
Stopping
The engine is switched off by moving the stop switch to the 
stop position.
CAUTION!  The stop switch automatically returns to the start 
position. In order to prevent unintentional starting, the spark 
plug cap must be removed from the spark plug when 
assembling, checking and/or performing maintenance. 
!
WARNING! The complete clutch cover and 
shaft must be fitted before the machine is 
started, otherwise the clutch can come loose 
and cause personal injury.
Always move the machine away from the 
refuelling area before starting. Place the 
machine on a flat surface. Ensure the cutting 
attachment cannot come into contact with 
any object. 
Make sure no unauthorised persons are in 
the working area, otherwise there is a risk of 
serious personal injury. The safety distance 
is 15 metres.