Husqvarna 536 LIR ユーザーズマニュアル

12 – English

•

Only use the recommended trimmer heads and 
trimmer lines. These have been tested by the 
manufacturer to suit a particular motor size. This is 
especially important when a fully automatic trimmer 
head is used. Only use the recommended cutting 
attachment. See the chapter on Technical data.

•

Smaller machines generally require small trimmer 
heads and vice versa. This is because when clearing 
using a line, the motor must throw out the line radially 
from the trimmer head and overcome the resistance of 
the grass being cleared.

•

The length of the line is also important. A longer cord 
requires greater motor power than a shorter line of the 
same diameter.

•

Make sure that the cutters on the trimmer guard are 
intact. These are used to cut the line to the correct 
length. Different line lengths can result in 
unnecessary vibrations. Tap the trimmer head to get 
correct lengths on the line.

•

To increase the life of the line it can be soaked in water 
for a couple of days. This will make the line tougher so 
that it lasts longer.

IMPORTANT!

Always ensure the trimmer line is wound tightly and 
evenly around the drum, otherwise the machine will 
generate harmful vibration.