Husqvarna 327HE3X ユーザーズマニュアル

10 – English

1

Assemble the hand guard and loop handle by 
screwing them together. Take care to align the holes 
in both parts. (327HDA65)

2

Slide the loop handle and hand guard onto the shaft. 
(327HDA65)

3

Slide the spacer into the slot in the loop handle.

4

Fit the nut and screw. Do not overtighten.

5

Now make a final adjustment to give yourself a 
comfortable working position. Tighten the screw. 
CAUTION! The loop handle and hand guard must not 
be fitted behind the arrow marked on the shaft.

Fit the handle using two screws.

It is important that the hedge trimmer is laid on a flat 
surface when you fit the cutting head. Otherwise the 
cutting head may not be fitted straight.

1

Fit the cutting head to the shaft. CAUTION! Make sure 
the drive shaft inside the shaft engages with the 
recess in the cutting head.

2

Tighten the lower screw first, then the upper screw.