Husqvarna 327HE3X ユーザーズマニュアル
WORKING TECHNIQUES
English
–
17
•
Always lay the machine on the ground when you are
not using it.
not using it.
•
Do not cut too close to the ground. Stones and other
objects can be thrown out.
objects can be thrown out.
•
Check the working area for foreign objects such as
electricity cables, insects and animals, etc, or other
objects that could damage the cutting attachment,
such as metal items.
electricity cables, insects and animals, etc, or other
objects that could damage the cutting attachment,
such as metal items.
•
If any foreign object is hit or if vibrations occur stop the
machine immediately. Disconnect the HT lead from
the spark plug. Check that the machine is not
damaged. Repair any damage.
machine immediately. Disconnect the HT lead from
the spark plug. Check that the machine is not
damaged. Repair any damage.
•
If anything jams in the blades while you are working,
switch off the engine and wait until it has stopped
completely before cleaning the blades. Disconnect the
HT lead from the spark plug.
switch off the engine and wait until it has stopped
completely before cleaning the blades. Disconnect the
HT lead from the spark plug.
Safety instructions after completing work
•
The transport guard should always be fitted to the
cutting attachment when the machine is not in use.
cutting attachment when the machine is not in use.
•
Make sure the cutting attachment has stopped before
cleaning, carrying out repairs or an inspection.
Disconnect the HT lead from the spark plug.
cleaning, carrying out repairs or an inspection.
Disconnect the HT lead from the spark plug.
•
Always wear heavy-duty gloves when repairing the
cutting attachment. This is extremely sharp and can
easily cause cuts.
cutting attachment. This is extremely sharp and can
easily cause cuts.
•
Store the machine out of reach of children.
•
Use only original spare parts for repairs.
Basic working techniques
•
Work with a swinging action from the bottom upwards
when trimming sides.
when trimming sides.
•
Adjust the throttle setting to suit the load.
•
When trimming a hedge the engine should always
face away from the hedge.
face away from the hedge.
•
Hold the machine as close to your body as possible to
get the best balance.
get the best balance.
•
Make sure that the tip does not touch the ground.
•
Do not rush the work, but work steadily until all the
branches have been cut back cleanly.
branches have been cut back cleanly.
Changing the hedge trimmer angle
(327HE3, 327HE4)
•
Loosen the knob on the shaft (clockwise).
•
Press the cutting unit against the hedge or some other
firm surface until the required angle is set.
firm surface until the required angle is set.
•
Turn the knob (anti-clockwise).