Husqvarna H348SG ユーザーズマニュアル
9
STORAGE
When grass catcher is to be stored for a period of time,
clean it thoroughly, remove all dirt, grass, leaves, etc. Store
in a clean, dry place.
clean it thoroughly, remove all dirt, grass, leaves, etc. Store
in a clean, dry place.
CAUTION: Do not leave grass in bagger
containers. Empty containers after each
use and before storing. Failure to do so
may result in spontaneous com bustion
which could develop into a fire.
containers. Empty containers after each
use and before storing. Failure to do so
may result in spontaneous com bustion
which could develop into a fire.
GENERAL RECOMMENDATIONS
Always observe safety rules when performing any main-
te nance.
•
te nance.
•
Before each use check for loose fasteners.
•
Clean unit thoroughly after each use.
BLADE CARE
For best results mower blades must be kept sharp. Re place
bent or damaged blades.
•
bent or damaged blades.
•
See BLADE CARE instructions in your tractor owner's
manual.
manual.
CAUTION: BEFORE PERFORMING ANY
MAINTENANCE, SERVICE OR AD JUST -
MENTS:
MAINTENANCE, SERVICE OR AD JUST -
MENTS:
•
Depress clutch brake pedal fully and
set parking brake.
set parking brake.
•
Place gearshift/motion control lever in
"NEUTRAL" position.
"NEUTRAL" position.
•
Place clutch control in "DIS ENGAGED"
position.
position.
•
Turn ignition key to "OFF" position.
•
Make sure blades and all moving parts
have completely stopped.
have completely stopped.
• Disconnect spark plug wire(s) from
spark plug(s) and place wire where it
cannot come in contact with plug.
cannot come in contact with plug.
CUSTOMER RESPONSIBILITIES
CAUTION: Grass catcher components
are subject to wear, damage and
deterioration, which could expose
moving parts or allow objects
to be thrown. Frequently check
c o m p o n e n t s a n d r e p l a c e w i t h
manufacturer's recommended parts,
when necessary.
are subject to wear, damage and
deterioration, which could expose
moving parts or allow objects
to be thrown. Frequently check
c o m p o n e n t s a n d r e p l a c e w i t h
manufacturer's recommended parts,
when necessary.