Husqvarna 430LS ユーザーズマニュアル

ページ / 28
 
GENERAL SAFETY PRECA
 
UTIONS
 
8
 
 – 
 
English
 
Cutting attac
 
hment guard
 
This guard is intended to pre
 
vent loose objects from being 
thrown towards the operator. The guard also protects the 
operator from accidental contact with the cutting 
attachment.
Check that the guard is undamaged and not cracked. 
Replace the guard if it has been exposed to impact or is 
cracked.
Always use the recommended guard for the cutting 
attachment you are using. See chapter on Technical data.
 
Muffl
 
er
 
The m
 
uffler is designed to keep noise levels to a minimum 
and to direct exhaust fumes away from the user. 
In countries that have a warm and dry climate there is a 
significant risk of fire. We therefore fit certain mufflers with 
a spark arrestor screen. Check whether the muffler on 
your machine is fitted with this kind of screen.
For mufflers it is very important that you follow the 
instructions on checking, maintaining and servicing your 
machine.
Never use a machine that has a faulty muffler.
Regularly check that the muffler is securely attached to 
the machine.
If the muffler on your machine is fitted with a spark 
arrestor screen this must be cleaned regularly. A blocked 
screen will cause the engine to overheat and may lead to 
serious damage.
!
 
W
 
ARNING! Never use a cutting 
attachment without an approved guard. 
See the chapter on Technical data. If an 
incorrect or faulty guard is fitted this can 
cause serious personal injury.
!
 
W
 
ARNING! The inside of the muffler 
contain chemicals that may be 
carcinogenic. Avoid contact with these 
elements in the event of a damaged 
muffler.
!
 
W
 
ARNING! Bear in mind that:
The exhaust fumes from the engine are 
hot and may contain sparks which can 
start a fire. Never start the machine 
indoors or near combustible material!
 
H1153174-95,426LST,430LS,US.fm  Page 8  Monday, November 30, 2009  10:56 AM