Husqvarna 965069703 ユーザーズマニュアル

10 – 

English

•

Position the handle on the shaft. Note that the handle 
must be mounted below the arrow on the shaft.

•

Fit the screw, securing plate and wing nut as shown in the 
diagram.

•

Tighten the wing nut.

When fitting the cutting attachment it is extremely important 
that the raised section on the drive disc/support flange 
engages correctly in the centre hole of the cutting attachment. 
If the cutting attachment is fitted incorrectly it can result in 
serious and/or fatal personal injury.

•

Fit the correct trimmer guard (A) for use with the trimmer 
head. 

Hook the trimmer guard/combination guard onto the fitting 
on the shaft and secure with the bolt (L).

•

Fit the drive disc (B) on the output shaft.

•

Turn the blade shaft until one of the holes in the drive disc 
aligns with the corresponding hole in the gear housing.

•

Insert the locking pin (C) in the hole to lock the shaft.

•

Screw on the trimmer head/plastic blades (H) in the 
opposite direction to the direction of rotation.

•

To dismantle, follow the instructions in the reverse order.