Husqvarna 536LiHD60X ユーザーズマニュアル
GENERAL SAFETY PRECAUTIONS
12 – English
•
Then press the power trigger up to apply full power.
Release the power trigger and check thereby the free
back movement of the power trigger. The cutting unit must
stop within 1 second.
back movement of the power trigger. The cutting unit must
stop within 1 second.
Restart the machine and release the power trigger lockout
on the front handle. Check that the power trigger lockout
returns to its original position when you release it. The
cutting unit must stop within 1 second.
on the front handle. Check that the power trigger lockout
returns to its original position when you release it. The
cutting unit must stop within 1 second.
Hand guard
The hand guard prevents hands from coming into contact
with the moving blades, for example, if the operator loses
grip on the front handle.
with the moving blades, for example, if the operator loses
grip on the front handle.
Check that the hand guard is fitted correctly. Check that
the hand guard is undamaged.
the hand guard is undamaged.
Blade and blade guard
The outer part of the blades (1) is shaped as blade
guards.
guards.
Check that the blade guard is not damaged or distorted.
Replace the cutting unit if it is bent or damaged. The term
”power tool” in the warnings refers to your mains-operated
(corded) power tool or battery-operated (cordless) power
tool.
Replace the cutting unit if it is bent or damaged. The term
”power tool” in the warnings refers to your mains-operated
(corded) power tool or battery-operated (cordless) power
tool.
Fitting the end protection on the cutting
deck
deck
The tip protector is used to protect the outer end of the
blade.
blade.
•
Fit the end protection on the cutting unit.
•
Use the screw and the nut on the cutting deck. Tighten
to 8 Nm.
to 8 Nm.
Li-ion
Li-ion
Li-ion
Li-ion
1