Husqvarna 322R ユーザーズマニュアル

English – 

17

• Remove the screw at the

rear of the throttle handle.

• Slide on the throttle

handle on the right-hand
side of the handlebars, (see
the diagram).

• Align the hole in the

throttle handle for the
fixing screw with the hole
on the handlebars.

• Refit the screw in the rear

of the throttle handle.

• Fit the screw through the

throttle handle and the
handlebars and tighten.

• Unscrew the bracket

components from the
handlebar bracket.

• Position the handlebars as

shown. Fit the bracket
components and tighten
the handle lightly.

• Put on the harness and

hang the machine in the
suspension hook. Now
finely adjust so that the
machine gives a
comfortable working
position when it‘s
attached to the harness.
Tighten the handle.

• The handlebars can easily

be turned to fit along the
shaft for easy
transportation and storage.

• Loosen the knob. Turn the

handles clockwise so that
the throttle comes against
the engine.

• Thereafter fold the

handlebars around the
shaft. Tighten the handle.

• Attach the transport

guard.

• Remove the screw at the

rear of the throttle
handle.

• Slide on the throttle

handle on the right-hand
side of the handlebars,
(see the diagram).

• Align the hole in the

throttle handle for the
fixing screw with the
hole on the handlebars.

• Refit the screw in the

rear of the throttle
handle.

• Fit the screw through the

throttle handle and the
handlebars and tighten.

• Fit the bracket

components as shown in
the diagram.

• The handle mounting

must be fitted between
the arrows on the shaft.

• Loosely tighten the four

screws.

• Put on the harness and

hang the machine in the
suspension hook. Now
finely adjust so that the
machine gives a
comfortable working
position when it’s
attached to the harness.
Tighten the screws.