Husqvarna 245RX ユーザーズマニュアル

ページ / 43
 
6 – 
 
English
 
SAFETY INSTRUCTIONS
 
Cutting equipment
 
Saw blades are intended for cutting fibrous types of wood.
Grass blades and grass cutters are intended for cutting 
coarse grass.
A trimmer head is intended for trimming grass.
 
Locking nut
 
A locking nut is used to secure some types of cutting 
attachment.
 
Checking, maintaining and servicing 
the machine
  
′′′′
 
s safety equipment
 
Throttle lock
 
Make sure the throttle control is locked at the idle setting 
when the throttle lock is released.
Press the throttle lock and make sure it returns to its 
original position when you release it.
Check that the throttle control and throttle lock move freely 
and that the return springs work properly.
The throttle lock is designed to prevent accidental operation 
of the throttle control. When you press the lock (A) (i.e. when 
you grasp the handle) it releases the throttle control (B). 
When you release the handle the throttle control and the 
throttle lock both move back to their original positions. This 
movement is controlled by two independent return springs. 
This arrangement means that the throttle control is 
automatically locked at the idle setting.
!
 
WARNING! Bear in mind that:
Engine exhaust fumes contain carbon 
monoxide, which can cause carbon 
monoxide poisoning. For this reason you 
should not start or run the machine indoors, 
or anywhere that is poorly ventilated. 
The exhaust fumes from the engine are hot 
and may contain sparks which can start a 
fire. Never start the machine indoors or near 
combustible material!
 
IMPORTANT!
All servicing and repair work on the machine requires 
special training. This is especially true of the machine
 
 
safety equipment. If your machine fails any of the checks 
described below you must contact your service agent. 
When you buy any of our products we guarantee the 
availability of professional repairs and service. If the retailer 
who sells your machine is not a servicing dealer, ask him for 
the address of your nearest service agent.
The life span of the machine can be reduced and the risk of 
accidents can increase if machine maintenance is not 
carried out correctly and if service and/or repairs are not 
carried out professionally. If you need further information 
please contact your nearest service workshop.