Husqvarna 265RX ユーザーズマニュアル

16 – 

English

(240R, 250R)

•

Remove the screw at the rear of the throttle handle.

•

Slide the throttle handle onto the right side of the 
handlebar, (see diagram).

•

Align the screw hole in the throttle handle with the hole in 
the handlebar.

•

Refit the screw in the hole in the rear of the throttle handle.

•

Screw the screw through the handle and handlebar. 
Tighten it.

•

Unscrew the knob from the handlebar mounting.

•

Position the handlebar as shown. Fit the mounting 
components and tighten the knob lightly.

•

Put on the harness and hang the machine from the 
support hook. Now make a final adjustment so that the 
machine is in a comfortable working position when it 
hangs from the harness.

•

 Tighten the knob.

(240F, 252RX)

•

Unscrew the knob from the handlebar mounting.

•

Position the handlebar as shown. Fit the mounting 
components and tighten the knob lightly.

•

Fit the right handle to the handlebar using the screw, 
washer, sleeve and nut as shown. Tighten.

•

Put on the harness and hang the machine from the 
support hook. Now make a final adjustment so that the 
machine is in a comfortable working position when it 
hangs from the harness. 

Tighten the knob.

(240R, 240F, 250R, 252RX)

•

The handlebar can easily be turned to fit along the shaft 
for easier transportation and storage.

•

Loosen the knob. Turn the handlebar clockwise so that the 
throttle handle rests against the engine.

•

Now twist the handlebar around the shaft. Tighten the 
knob.

•

Fit the transport guard to the cutting attachment.