Husqvarna 265RX ユーザーズマニュアル

English

 – 19

Fit the trimmer guard/combination guard (A) intended for use 
with the trimmer head/plastic blades. Secure the trimmer 
guard using the 4 screws (L) and the support plate (M) as 
shown.

•

Fit the drive disc (B) on the output shaft.

•

Turn the blade shaft until one of the holes in the drive disc 
aligns with the corresponding hole in the gear housing.

•

Insert the locking pin (C) in the hole to lock the shaft.

•

Screw on the trimmer head/plastic blades (H) in the 
opposite direction to the direction of rotation.

•

To dismantle, follow the instructions in the reverse order.

At the front is an easily accessible, quick release. Use this if 
the engine catches fire or in any other emergency situation 
that requires you to free yourself from the machine and 
harness.

A well-adjusted harness and machine makes work much 
easier. Adjust the harness for the best working position. 
Tension the side straps so that the weight is evenly distributed 
across both shoulders.

1

Forestry clearing 

The machine should be supported in a harness when 
forestry clearing so that the cutting equipment is angled 
slightly forwards in relation to the ground. Adjust the 
height using the strap on the harness for the support 
hook.

2

Grass clearing 

The machine should be supported in a harness when 
grass clearing so that the cutting equipment is parallel to 
the ground.

Push down the red release lever to release the machine from 
the harness.