Husqvarna 265RX ユーザーズマニュアル

ページ / 45
English
 – 25
WORKING TECHNIQUES
General working instructions
Basic safety rules
1
Look around you:
To ensure that people, animals or other things cannot 
affect your control of the machine.
To ensure that people, animals, etc., do not come into 
contact with the cutting attachment or loose objects that 
are thrown out by the cutting attachment.
CAUTION! Do not use the machine unless you are able to 
call for help in the event of an accident.
2
Do not use the machine in bad weather, such as dense 
fog, heavy rain, strong wind, intense cold, etc. Working in 
bad weather is tiring and often brings added risks, such as 
icy ground, unpredictable felling direction, etc.
3
Make sure you can move and stand safely. Check the area 
around you for possible obstacles (roots, rocks, branches, 
ditches, etc.) in case you have to move suddenly. Take 
great care when working on sloping ground.
4
Take great care when cutting a tree that is in tension. A 
tree that is in tension may spring back to its normal 
position before or after being cut. If you position yourself 
incorrectly or make the cut in the wrong place the tree may 
hit you or the machine and cause you to lose control. Both 
situations can cause serious personal injury.
5
Switch off the engine before moving to another area. Fit 
the transport guard before carrying or transporting the 
equipment any distance.
6
Never put the machine down with the engine running 
unless you have it in clear sight.
The ABC of clearing
Always use the correct equipment.
Make sure the equipment is well adjusted.
Follow the safety precautions.
Organise your work carefully.
Always use full throttle when starting to cut with the blade.
Always use sharp blades.
Avoid stones.
Control the felling direction (take advantage of the wind).
IMPORTANT!
This section describes the basic safety precautions for 
working with clearing saws and trimmers.
If you encounter a situation where you are uncertain how to 
proceed you should ask an expert. Contact your dealer or 
your service workshop.
Avoid all usage which you consider to be beyond your 
capability.
You must understand the difference between forestry 
clearing, grass clearing and grass trimming before use.
!
WARNING! Neither the operator of the 
machine nor anyone else may attempt to 
remove the cut material while the engine is 
running or the cutting equipment is rotating, 
as this can result in serious injury.
Stop the engine and cutting equipment 
before you remove material that has wound 
around the blade shaft as otherwise there is 
a risk of injury. The bevel gear can get hot 
during use and may remain so for a while 
afterwards. You could get burnt if you touch 
it.
!
WARNING! Watch out for thrown objects. 
Always wear approved eye protection. Never 
lean over the cutting attachment guard. 
Stones, rubbish, etc. can be thrown up into 
the eyes causing blindness or serious injury.
Keep unauthorised persons at a distance. 
Children, animals, onlookers and helpers 
should be kept outside the safety zone of 15 
m. Stop the machine immediately if anyone 
approaches. Never swing the machine 
around without first checking behind you to 
make sure no-one is within the safety zone.