Husqvarna 324HDA55 ユーザーズマニュアル

 

12 – 

 

English

1

Assemble the hand guard and loop handle by screwing 
them together. Take care to align the holes in both parts.

2

Slide the loop handle and hand guard onto the shaft.

3

Slide the spacer into the slot in the loop handle.

4

Fit the nut and screw. Do not overtighten.

5

Now make a final adjustment to give yourself a 
comfortable working position. Tighten the screw. 
CAUTION! The loop handle and hand guard must not be 
fitted behind the arrow marked on the shaft.

It is important that the hedge trimmer is laid on a flat surface 
when you fit the cutting head. Otherwise the cutting head may 
not be fitted straight.

1

Fit the cutting head to the shaft. CAUTION! Make sure the 
drive shaft inside the shaft engages with the recess in the 
cutting head.

2

Tighten the lower screw first, then the upper screw.