Husqvarna 325HD75X ユーザーズマニュアル

English

 –

 9

Never use a machine that has a faulty muffler.

Regularly check that the muffler is securely attached to 
the machine.

To ensure good cutting results it is important that the 
contact pressure between the blades is correct. The 
contact pressure is adjusted by turning the screws on the 
underside of the bar clockwise as far as they will go. Then 
turn the screws anticlockwise a 1/4 turn. Lock the screws 
using the locking nut on the top of the bar. Check that the 
screws are loose enough to allow the washers under the 
screw heads to slide sideways.

When the blades are correctly adjusted the play between 
the blades should be 0,2–0,4 mm, measured at the 
screws.

The edges of the blades are too hard to be filed. Dull 
blades should be sharpened using a grinder.

Check that the blades are undamaged and show no signs 
of cracking or other damage.

The blade guard (A) is intended to protect against any 
part of the body coming into contact with the blades (B).

Check that the blade guard is not damaged or distorted. 
Replace the blade guard if it is bent or damaged.

The gear housing gets hot when the machine has been in 
use. To avoid burning yourself do not touch the gear 
housing.