Husqvarna 227R/RD ユーザーズマニュアル

18

 – English

• Remove the screw at the

rear of the throttle handle.

• Slide on the throttle

handle on the right-hand
side of the handlebars, (see
the diagram).

• Align the hole in the

throttle handle for the
fixing screw with the hole
on the handlebars.

• Refit the screw in the rear

of the throttle handle.

• Fit the screw through the

throttle handle and the
handlebars and tighten.

• Unscrew the bracket

components from the
handlebar bracket.

• Position the handlebars as

shown. Fit the bracket
components and tighten
the handle lightly.

• Fit the cabling as shown.

• Put on the harness and

hang the machine in the
suspension hook. Now
finely adjust so that the
machine gives a
comfortable working
position when it‘s
attached to the harness.
Tighten the handle.

• Remove the screw at the

rear of the throttle
handle.

• Slide on the throttle

handle on the right-hand
side of the handlebars,
(see the diagram).

• Align the hole in the

throttle handle for the
fixing screw with the
hole on the handlebars.

• Refit the screw in the

rear of the throttle
handle.

• Fit the screw through the

throttle handle and the
handlebars and tighten.

• Unscrew the handle

from the handlebar
bracket.

• Position the handlebars

as shown. Fit the bracket
components and tighten
the handle lightly.

• Put on the harness and

hang the machine in the
suspension hook. Now
finely adjust so that the
machine gives a
comfortable working
position when it‘s
attached to the harness.
Tighten the handle.