Electrolux 95390052100 ユーザーズマニュアル

Use of the manual
• Anyone who uses the machine should have 

read the entire manual with extreme care.

• All users should be familiar with the operations 

for use of the machine under absolutely safe 
conditions as described in this manual, and 
should be instructed in the proper cutting 
techniques to use, possibly by practical 
demonstration.

• Do not allow children or persons who are not 

familiar with these instructions and are not 
sufficiently trained to use the brush cutter. 
Local regulations may specify an age limit for 
users.

• Keep this manual with the machine when 

selling or lending it, to enable the future users 
to familiarize themselves with the product and 
instructions for safe use.

• All parts of the manual are equally important for 

the purpose of preventing injury to the operator 
or damage to the machine. To facilitate your 
reading, section B is divided into parts that can 
be called up in the rest of the manual, marked 
with the “CAUTION” symbol followed by the 
number of the corresponding paragraph, to 
concentrate your attention on the main safety 
procedures related to a particular situation. 

Prior to use
• Respect of the procedures described in this 

manual does not eliminate the risks of 
accidents but does reduce the probability of 
their occurring or the effect of the damage.

• If you have never used a brush cutter before, 

practice using it for a while before actually 
starting to work with it.

• The operator or user is responsible for any 

damages to third parties or their property, and 
for any dangers to which they may be subject.

• Do not use this machine for any other purpose 

than that for which it was designed, using the 
proper cutting devices as indicated in the 
instructions.

• Do not use the machine if you are tired, in poor 

health or under the effects of alcohol or 
medication that could affect your reactions.

• Make sure you know how to stop the engine 

and blade if necessary (see section entitled 
“Starting and stopping the engine”).

Inspect the machine carefully before every 
use, in case of violent impact or signs of 

malfunction. Make sure the machine is correctly 
assembled, and all its parts are working 
properly. Make sure the screws are all in place 
and securely tightened. Check operation of the 
accelerator control block and make sure there is 
no leakage of fuel. Check that the cutting tool 
does not move with the motor running at idle 
speed. Make sure the transmission pipe is 
properly fastened to the motor joint and the line 
cutter head or blade are correctly fastened with 
the screw fastening the blade fully tightened. 
Check the backpack and make sure the motor is 
securely fastened to its housing.

Replace any accessories (blades, nylon 
string heads, guards) which show damage 

or cracks or appear excessively worn. Have your 
Authorized Service Center replace any damaged 
parts. For nylon string heads, use only strings 
made of flexible material recommended by the 
manufacturer. For example, you should never 
use metal wire because it could cause serious 
injuries to people, property and animals. An 
unsuitable string could break and turn into a very 
dangerous missile. In mounting the cutting 
utensils follow the instructions in the chapter 
entitled “Usable cutting tools and their 
installation on the machine”. ABSOLUTELY DO 
NOT USE THE BRUSH CUTTER IF THE 
SPECIFIC SAFETY GUARD FOR THE 
CUTTING DEVICE IN USE IS NOT SECURELY 
FASTENED (see chapter “Assembly/
disassembly”). Failure to follow this rule can 
expose you to serious danger such as:
• possible contact with rotating and cutting parts;

Minimum safety distance 15m.

Emergency stop.

Maximum shaft speed.

15 m

Danger of kickback. The blade is 
capable of amputating arms and 
legs.

CAUTION! 
Danger of serious leg injuries. 
Take scrupulous care to follow the 
instructions in the manual.

CAUTION! 
The cutting parts and muffler may 
get very hot and cause burns. Wait 
a few minutes before touching 
them.