Manualsbrain.com
  1. マニュアル
  2. ブランド
  3. Yamaha
  4. 337
  5. ユーザーズマニュアル

Yamaha 337 ユーザーズマニュアル

ダウンロード
ページ / 300
Quic
k Guide — Pla
ying the MO
TIF ES
Using the Plug-in Board
78
Owner’s Manual
Using an Effect Plug-in Board
In the example explanation below, the PLG100-VH Vocal Harmony Plug-in Board is used to apply harmony effects to the 
microphone sound in the Performance mode.
n For Songs/Patterns, the Effect Plug-in Board related parameters (which correspond to step #6 - 7 below) can be edited in the Song Mixing mode/Pattern 
Mixing mode. 
n Please note that the Effect Plug-in Board cannot be used in the Voice mode. 
n A standard dynamic microphone is recommended. (The MOTIF ES 
does not support phantom-powered condenser microphones.)
For details, refer to the Owner’s Manual of the PLG100-VH. 
1
After turning the power off, install the Effect 
Plug-in Board PLG100-VH to slot 1.
2
Plug the microphone to the A/D INPUT jack on 
the rear panel (page 72). 
3
Turn the MOTIF ES power on. 
4
Press the [PERFORM] button to enter the 
Performance Play mode, select the desired 
Performance, then set the microphone related 
parameters. 
5
Check the status of the installed Plug-in Boards 
in the [UTILITY] 
→
 [F6] PLUG 
→
 [SF1] STATUS 
display.
6
Select “PartAD” as the Part to which the Plug-in 
Insertion Effect is applied in the CONNECT 
display ([PERFORM] 
→
→
→
→
 [F3] EFFECT 
→
→
→
→
 [SF1] 
CONNECT).
A / D  INPUT
L
R
GAIN
Move the cursor here, then select the Part. 
7
Set related parameters (such as the Effect Type, 
and others) from the Plug-in Effect display 
([PERFORM] 
→
 [EDIT] 
→
 [COMMON] 
→
 [F6] 
EFFECT 
→
 [SF3] PLG-EF).
8
Sing or talk into the microphone to check the 
effect sound, and adjust the settings as 
necessary.
9
If desired, store the settings for the microphone 
sound and PLG100-VH as a Performance in the 
Performance Store mode (page 91).  
A / D  INPUT
L
R
GAIN