Tascam DP-01FX/CD ユーザーズマニュアル
Advanced techniques
TASCAM DP-01 Owner’s Manual
33
Pun
ching
Punch recording
When you have rehearsed your punch-in, you can start recording.
1
Press the
RHSL
key so that the indicator goes out (but the
AUTO
PUNCH
indicator is still lit).
2
Press
PLAY
so that playback starts. Use the pre-roll time to get ready to
record.
At the punch-in point, the DP-01 goes into record mode (the
RECORD
indicator lights).
At the punch-out point, recording stops (the
RECORD
indicator goes
out), and playback continues until the post-roll point and then returns
to the pre-roll point. The
to the pre-roll point. The
AUTO PUNCH
indicator is turned off (the
track arming status stays the same).
If you want to re-record the punch, turn
AUTO PUNCH
back on before
recording again.
Pre-roll and post-roll times
The pre-roll and post-roll times can be set to suit your style of play-
ing.
ing.
1
Press
MENU
and scroll down to
PREFERENCE
and press the
key.
The pre-roll and
post-roll times can
post-roll times can
be set between 1.0 seconds and
9.9 seconds in 0.1 second steps
9.9 seconds in 0.1 second steps
2
Use the cursor keys to move the cursor to the
Pre
(pre-roll time) item,
and use the jog wheel to set the value in seconds.
3
Use the cursor keys to move down to the
Post
(post-roll time) item and
use the jog wheel to change the value.
4
Press
EXIT
when you’re done, so that you can start using these settings.
DP-01_OM_E.book 33 ページ ２００５年６月１３日 月曜日 午後７時１４分