Tascam DP-01FX/CD ユーザーズマニュアル

You can select MIDI channel, note/note on velocity of a regular click, and 
note/note on velocity of an accent.

Scroll the list to set the following parameters:

Select from 

 (only at recording) and 

 (at recording 

and playback).

The MIDI channel on which the metronome signals are output.

The note played at the start of each bar. 

C3

 is equivalent to 

MIDI note 60.

The velocity (which typically affects the volume) of the note at 

the start of each bar.

The note played at each beat, except at the start of each bar. 

C3

 

is equivalent to MIDI note 60.

The velocity (which typically affects the volume) of the note at 

each beat, except the start of each bar.

The metronome function is disabled, and no items other than Output are 
displayed.

The DP-01 is equipped with a MIDI OUT jack. This can be used to
drive a sequencer, drum machine, etc., either synchronized to a time
base, or a MIDI clock (see below for an explanation of how this
works). MIDI OUT is also used to drive a MIDI instrument as a met-
ronome (see “Metronome” on page 37).

A MIDI instrument can be connected to the 

 and 

 inputs, or mixed with 

the recorded tracks from the analog outputs if it is fed into the 

 

inputs.

The MIDI song control messages put out by the DP-01 from the
MIDI OUT port include tempo (MIDI Clock), bar and beat information
(Song Position Pointer), and Start/Stop/Continue messages. This
way of working is particularly suitable for synchronizing with bar/
beat-based MIDI devices such as drum machines and rhythm units.

MIDI

DP-01_OM_E.book  38 ページ  ２００５年６月１３日　月曜日　午後７時１４分