Tascam D00871320A ユーザーズマニュアル

ページ / 88
Using the USB connection
46 
TASCAM DP-01 Owner’s Manual
Advanc
ed techn
iques
3
Use the jog wheel to move the selection cursor ( ) to the song to be
backed up. Press 
ENTER
.
If you do not have
enough space on
the FAT partition to back up a song,
you must connect the DP-01 to a
PC and manage the files from the
PC.
4
You can now use the left and right cursor keys and the wheel to name
the song archive (up to 8 characters) (see “Titling” on page 15) :
5
Press 
ENTER
 to back up the song to the FAT partition. An error mes-
sage appears if there is not enough space.
The song is then copied as an archive from the current partition to the
FAT partition (with a 
.001
 extension). Messages appear on the screen as
the DP-01 goes through the file archiving process.
6
Connect the DP-01 to the computer using the USB cable, and “open”
the drive (““Open” and “Close”” on page 45).
7
Use the PC operating system to copy or move the song archive from
the 
BACKUP
 directory of the DP-01 FAT partition to the PC.
You should not
rename the song
archive on the PC as this may “con-
fuse” the DP-01 when you come to
restore it.
Once the song archive is on the PC, you can “close” the DP-01. 
The song archive on the PC can then be backed up to CD-R, etc. You
can restore it later to the same DP-01 or to a friend’s DP-01, allowing
you to complete the recording at another location, or perform the final
mix where there are better speakers available, etc.
Restoring a song
This is basically the reverse of the backup process, allowing you to
transfer a song archive from a PC to the DP-01.
1
Connect the DP-01 to the PC using the USB cable, and “open” the
drive (““Open” and “Close”” on page 45).
2
Use the PC operating system to copy the song archive from the PC to
the 
BACKUP
 directory of the DP-01 FAT partition.
3
“Close” the DP-01.
4
Press 
MENU
 and select the 
BACKUP
 menu.
If there are no song
archive files on the
FAT partition, a message is shown.
5
Select the 
SONG RESTORE 
action and press the 
 key. The display
shows the song archive files on the FAT partition
Although the DP-01
displays shorter file
names with spaces at the end of
the name, these spaces are not
part of the actual file name.
6
Select a song archive using the jog wheel and press 
ENTER
. The cur-
rent song is saved.
7
The “real” song name is extracted from the archive and shown:
8
Press 
ENTER
 to load the archived song as the current song. Appropri-
ate messages are shown if there is not enough disk space, etc.
DP-01_OM_E.book  46 ページ  2005年6月13日 月曜日 午後7時14分