Manualsbrain.com
  1. マニュアル
  2. ブランド
  3. Tascam
  4. DR-100
  5. ユーザーズマニュアル

Tascam DR-100 ユーザーズマニュアル

ダウンロード
ページ / 52
TASCAM  DR-100
 
29
6–Recording
Automatic recording (AUTO REC)
This function allows the unit to respond to input 
sound levels and start and pause recording, 
as well as set marks and create new files, for 
example. 
This function is convenient for recording only 
when people are speaking during meetings, 
creating marks for finding the starts of songs and 
dividing files after recording, and automatically 
dividing files. 
MODE
MARK
Automatically adds marks during recording
PAUSE
Automatically pauses during recording
TRK INC
Automatically creates new files during recording
START LEVEL
Signal is judged to have been input when it 
exceeds this level 
END LEVEL
Signal is judged to have stopped when it becomes 
less than this level
END DELAY
Time that recording continues after the signal 
level becomes less than the 
END LEVEL
 
NOTE
If you press the AUTO key when recording or in 
•
recording standby, the current AUTO REC setting 
can be checked. 
When AUTO REC is on, the RECORD [
•
º
] key will 
blink more rapidly than usual In recording standby.
Overdub recording is not possible when using the 
•
AUTO REC function.
Enabling automatic recording
When the input signal exceeds the 
START LEVEL
 
recording begins automatically. 
NOTE
The MODE setting does not affect this function.
1  Press the 
AUTO
 key to open the 
AUTO REC
 screen. 
2  Set the value of the 
START LEVEL
 item. 
3  Press the 
HOME
 key to return to the Home 
Screen. 
4  Press the 
RECORD
 (
º
) key while holding down 
the 
AUTO
 key to put the unit into recording 
standby. 
  Recording starts automatically when the input 
signal exceeds the 
START LEVEL
.
NOTE
Press the STOP 
(ª
) key to stop automatic recording. 
Automatically adding marks when 
recording (MARK)
The unit can be set to automatically add marks 
to files during recording after they become less 
than the 
END LEVEL
 setting and the 
END DELAY
 time 
passes. Marks can also be automatically added 
when the input signal exceeds the 
START LEVEL
 
setting again.
1  Press the 
AUTO
 key to open the 
AUTO REC
 screen. 
2  Set the 
MODE
 item to 
MARK
. 
3  Set the value of the 
END LEVEL
 item. 
4  Set the value of the 
START LEVEL
 item. 
5  Press the 
HOME
 key to return to the Home 
Screen. 
6  Press the 
RECORD
 (
º
) key while holding down 
the 
AUTO
 key to put the unit into recording 
standby.
  Recording starts automatically when the input 
signal exceeds the 
START LEVEL
 value. 
NOTE
Press the STOP (
•
ª
) key to stop automatic recording. 
You can also add marks manually. (
•