Tascam DP-008ex ユーザーズマニュアル

1.  Press the m [RTZ] button while pressing and 

holding the Stop (8) button to use the return to 

zero (RTZ) function to jump to the beginning of 

the song (00h00m00s00f).

2.  Press the Play (7) button to play the TRACK 1 

recording.

3.  Use the TRACK 1 LEVEL and MASTER LEVEL 

knobs to adjust the monitoring level. 

 

Use the VOLUME dial on the back of the unit to 

adjust the final monitoring volume.

You can use the TRACK 1 PAN knob to adjust the 

4.  When you are done listening to the recording, 

press the Stop (8) button to stop playback.

Now, you will record the lead guitar on TRACK 2 

while listening to the rhythm guitar on TRACK 1. 
Use the following procedures to change the recording 

source for TRACK 2.
1.  When the recorder is stopped, press the ASSIGN 

button to open the 

INPUT ASSIGN

 screen.

2.  Press the TRACK 2 REC button to set the 

TRACK 

2 SOURCE

 to 

A

.

3.  Press the HOME button to return to the Home 

Screen.

4.  Press the TRACK 2 REC button to put the track 

into recording standby. 

 The 

REC indicator blinks when in recording 

standby.

 

When you play the guitar, the input level is shown 

by the   (INPUT A) and   (TRACK 2) meters on 

the display.

 

Turn up the TRACK 2 LEVEL to hear the guitar 

sound through the headphones. When doing so, 

the   (left channel) and   (right channel) meters 

on the display become active.

TRACK 2 REC indicator