Tascam DP-008ex ユーザーズマニュアル

6

Use the TRIM knobs to adjust the input levels for 

INPUT A/B. (See “Making the first recording” on 

page 47.)
If an input source level is too high its OL (overload) 

indicator lights. If a TRIM knob is set too high 

(higher than 2–3 o’clock usually), the OL indicator 

could light even if the volume of the input source 

signal is suitable.

7

Adjusts the level of the stereo signal output from 

the PHONES and LINE OUT jack.
This knob also adjusts the recording level when 

bouncing tracks, mixing down and mastering.

8

Press this button to open the 

REVERB SETTING

 

screen. (See “Reverb” on page 61.)
Press this button and the EQ button at the same 

time to open the 

TRACK MUTE

 screen. (See 

9

Press to open the 

EQ SETTING

 screen where you 

can set the track equalizer. (See “Track equalizers” 

on page 61.)
Press this button and the REVERB button at the 

same time to open the 

TRACK MUTE

 screen. (See 

0

This shows various information.

q

Use the REVERB knob for a track to adjust the 

level (volume) of its playback signal or assigned 

input signal that is sent to the reverb effect.

w

Use to adjust the stereo position of the track 

playback signal. (See “Stereo position (panning)” 

e

Use to adjust the level of the track. (See “Level and 

balance” on page 61.)

r

Use to turn the track record function ON (arm for 

recording) and OFF. To monitor the input signals 

of the internal mics using headphones or an 

external monitoring system (powered monitor 

speakers or an amplifier and speakers), press that 

track’s REC button. When a REC button is ON, its 

REC indicator blinks when the recorder is stopped, 

and lights when it is recording.
On the 

INPUT ASSIGN

 screen, press this button 

to change the assignment.
On the 

TRACK MUTE

 screen, press this button to 

turn track muting ON and OFF.

t

The functions of these buttons depend on the 

current screen. The functions currently assigned 

to these buttons are shown at the bottom of the 

display screen.

referred to as F1, F2, F3 and F4 in order from the 

Stop (8) + F1 buttons: jump to the IN point

Stop (8) + F2 buttons: jump to the OUT point

y

Press to open the 

MENU

 screen. (See “Menu 

u

Press to open the the Home Screen. (See “Home 

Screen” on page 29.)
When the unit is stopped and the Home Screen is 

open, use this button to move the cursor between 

time counter divisions. (See “Direct locate 

function” on page 52.)

i

Press this button to open the 

METRONOME

 screen. 

(See “Metronome” on page 69.)

o

Press this button to open the 

TUNER

 screen. (See 

p

Use this to select items and change values on the 

setting screens.. When the unit is stopped and the 

Home Screen is open, turn to change the record/

playback position. (See “Direct locate function” on 

a

Press this button to undo the previous action or to 

redo the last undone action. (See “Undoing opera-

tions (undo)” on page 49.)
Press and hold this button to open the 

HISTORY

 

screen. Use the screen to undo multiple opera-

tions at once (multi-undo).
This indicator lights when one or more operations 

that have been undone can still be redone. 

s

Press this button when the recorder is stopped to 

open the 

TRACK EDIT

 screen.