Tascam DP-008ex ユーザーズマニュアル

3.  When the recorder is stopped, press the TUNER 

button to open the 

TUNER

 screen. The 

CALIB

 

item (standard frequency) value is selected 

(highlighted) when it opens.

4.  Use the DATA wheel to set the standard 

frequency of the A note between 435 and 445 Hz. 

(default value: “440Hz”)

5.  Play the instrument and tune it. 
 

The pitch name closest to the string appears 

above the meters. Tune the string roughly until 

the sound name that you want appears. Then, 

fine tune the string until the rectangle at the 

middle of the meter darkens, showing that the 

string is in tune. If the pitch is too low, a bar 

extends to the left of the middle and if it is too 

high it extends to the right. The longer the bar is 

the more out of tune the string is.

 

When the pitch is just right, the t and g to 

the left and right of the pitch name appear 

unblinking.

6.  When you are finished tuning, press the HOME 

button to open the Home Screen. 

IN A

 (INPUT A) 

44.)

1.  When the recorder is stopped, press the TUNER 

button to open the 

TUNER

 screen.

2.  Press the F4 [OSC.] button to show the oscillator 

mode on the 

TUNER

 screen.

3  Make the following oscillator mode settings on 

the 

TUNER

 screen.

Use this to adjust the standard frequency of A4 

(la) between 435 Hz and 445 Hz (default: 440 

Hz).

Use this to set the note output between C3 

and B5 (default: A4).

Use this to set the output level between a 

minimum value of 10 and a maximum of 100 

(default: 50).

 

Use the F3 [5] and F4 [b] buttons to select 

(highlight) parameters, and use the DATA wheel 

to set their values.

 

Use the F2 [ON] button to turn the output ON 

and OFF.

 

Use the F1 [CHROM.] key to switch to chromatic 

tuner mode.

4.  When you are finished tuning, press the HOME 

button to return to the Home Screen.

You can set the amount of time until the unit 

automatically turns OFF (enters standby) after its last 

activity or operation. 
1.  When the recorder is stopped, press the MENU 

button to open the 

MENU

 screen. 

2.  Use the DATA wheel to select (highlight) the 

PREFERENCE

 item and press the F4 [t] button 

to open the 

PREFERENCE

 screen. 

3.  Use the F3 [5] and F4 [b] buttons to select 

(highlight) the 

Auto Power Save

 item setting 

value, and use the DATA wheel to set it to one of 

the following values. 

 

Options: OFF (does not turn off automatically), 

3min, 5min, 10min, 30min (default value)

4.  After completing the setting, press the HOME 

button to return to the Home Screen.