Tascam D01175220A DP-006 ユーザーズマニュアル

TASCAM DP-006

4 – Preparations

Shutting down

Make the following preparations before shutting down the unit.

• Stop the recorder. (The unit cannot be shut down during recording,

playback, search forward, etc.)

• Return to the Home Screen.
• If the unit is connected to computer, disconnect the USB cable after

conducting the necessary procedures on the computer to unmount the

unit.

After making these preparations, press and hold the

button until the

following screen appears (or the

button indicator light begins to blink).

The power turns off after the unit completes its shutdown process, including

saving various information from your session.

CAUTION

•

Do not remove the batteries or disconnect the power cable accidently while

the unit is operating. If you do so, the unit cannot shut down properly and

all unsaved data will be lost. Lost data cannot be restored. We recommend

that you also save the data manually often.

•

When the power is turned OFF (put in standby mode), the operation

history of the currently loaded song will be completely erased. You will not

be able to undo or redo past song operations when you turn the power

back ON.

Start-up & shutdown

Starting up the unit

Press and hold the

button on the top panel until “TASCAM” appears (or

the

button indicator lights green).

After the start-up screen, the Home Screen appears.

Start-up screen Home Screen

This unit always starts up in MULTI TRACK recorder mode regardless of the

mode used last before shutting down.

CAUTION

•

Before turning the power ON or OFF (putting it into standby), minimize the

volume on any connected external monitoring system (powered monitor

speakers or an amplifier and speakers).

•

Do not wear headphones when turning the power ON or OFF (putting it

into standby) because noise at such times could harm your hearing.