Tascam D01175220A DP-006 ユーザーズマニュアル

3.  When finished editing, press the HOME button to return to the Home 

Screen. 

1.  Set the starting (IN) and ending (OUT) points for the time that you want 

to repeat, and then return to the Home Screen.

2.  Press the REPEAT button to start repeat playback. 

The   icon appears on the Home Screen during repeat playback.

Repeat icon

 

Playback starts from the IN point. When the OUT point is reached, after 

the set repeat interval elapses, playback starts again from the IN point.

 

Playback continues to repeat between the IN and OUT points. 

3.  Press the REPEAT button again to stop repeat playback. The   icon on 

the Home Screen disappears.

 

The next section explains how to set the repeat interval that determines 

the amount of time until playback starts again after the OUT point is 

reached.

If the time between the IN and OUT points is less than 2 frames, an I/
O Too Short

 pop-up message appears when you press the REPEAT 

The time between repetitions (repeat interval) can be set from 0.5 to 9.9 

seconds. 
1.  Press the MENU button to open the MENU screen. 
2.  Use the DATA wheel to select (highlight) the PREFERENCE menu item, 

and press the F4 [t] button to open the PREFERENCE screen. 

3.  Use the F3 [5] and F4 [b] buttons to select (highlight) the Repeat 

Int

 item setting value, and use the DATA wheel to set the value 

between 0.5sec (default value) and 9.9sec (in 0.1-second incre-

ments). 

 

Use the F3 [5] and F4 [b] buttons to select (highlight) the Repeat 
Int

 item setting value, and use the DATA wheel to set the value 

between 0.5sec and 9.9sec (in 0.1-second increments). 

4.  After making the setting, press the HOME button to return to the Home 

Screen.