Tascam D01175220A DP-006 ユーザーズマニュアル

After creating a stereo master track, you can listen to it by following these 

procedures.
1.  When the recorder is stopped, press the REC MODE button to open the 

RECORDER MODE

 screen. 

2.  Use the DATA wheel to select (highlight) the MASTER PLAY item. 

3.  Press the F4 [EXEC] button. 
 

After a Master Play! pop-up message appears, the recorder 

switches to MASTER PLAY mode, and the Home Screen reopens. 

When the recorder is in MASTER PLAY mode, MASTER PLAY appears 

If there is no stereo master track, a No Master Trk pop-up message 

will appear and the recorder mode will not change to MASTER PLAY.

4.  In this mode, press the Play (7) button to play the stereo master track. 
 

The stereo master track signal is output from the   /LINE OUT jack, so it 

can also be dubbed to an external stereo recorder. 

5.  After you have created a stereo master track that you are satisfied with, 

press the REC MODE button to open the RECORDER MODE screen, 

and use the DATA wheel to return the recorder to MULTI TRACK 

mode. 

 

If you are not satisfied with the stereo master track, you can create a new 

one. A new stereo master track will overwrite the previous one.

song, set the recorder mode to MASTER PLAY and then press the Play 

(7) button to start playback.

signal and record that sound through INPUT A/B to mix it with prere-

When this recorder is in MULTI TRACK mode, you can transfer a stereo 

computer. (See “Exporting stereo master tracks” on page 92.)

When this recorder is in MULTI TRACK mode, you can copy a stereo 

master track to TRACK 1 and TRACK 2 or stereo TRACK 3 or TRACK 4 by 

cloning the track. (See “CLONE TRACK (track duplication)” on page 69.)