Tascam D01175220A DP-006 ユーザーズマニュアル

A File Not Found (the file cannot be found) pop-up message appears 

7.  Use the DATA wheel to select (highlight) the file that you want to restore, 

and press the F2 [EXEC] button. 

 

The actual song name and an Are you sure? confirmation pop-up 

message appear. 

8.  Press the F3 [YES] button. 
 

After the currently loaded song is saved, the song selected in step 7 is 

restored and loaded.

If there is not enough open space on the SD card, a Card Full pop-up 

9. Press the HOME button to reopen the Home Screen.

You can import and export individual tracks between a computer and this 

unit’s FAT partition.
Files that can be imported/exported as tracks must be in the WAV format (with 

the “.WAV” extension).
You can import and export both mono and stereo files.
If you want to import an audio file that is of a different format, you must first 

convert it to a 16-bit, 44.1kHz mono/stereo WAV file.

Before importing a track, first select the partition with the song that you want 

to import it into as the active partition. Then, load the song that you want to 

import tracks into. (See “Selecting the active partition” on page 45.)
1.  Connect the unit to a computer using the included USB cable. (See 

“Connecting with a computer” on page 84.)

2.  Use the computer to copy WAV files on its drive to the WAVE directory in 

this unit’s FAT partition.

3.  After you have imported the track files from the computer, remove the 

USB cable using the proper procedures and disconnect the unit from the 

computer. (See “Disconnecting” on page 85.)

4.  After this unit restarts automatically, press the MENU button to open the 

MENU

 screen.