HP (Hewlett-Packard) 8360 ユーザーズマニュアル

 

 

FM:SENSitivity 

 

 AC

FM:STATe 

Analyzer: 

NONE

 

 

 On/Off Ext

This 

 (Option 002 only) activates the frequency modulation

mode for an external source. The FM source is connected to the FM
modulation connector. The FM sensitivity function is active. It is
factory preset to 10 MHz/V. Use the numeric entry keys, arrow keys,
or rotary knob to change the sensitivity to 100 

 or 1 MHz/V.

When external FM is in effect, the RF output is frequency modulated
with a rate and depth set by the external source. The FM coupling

is controlled by the following softkeys: FM Coupling 

FM Coupling DC!. The FM coupling defaults to 100 

 This is AC

coupling for FM rates of 100 

 or greater. For modulation rates

below 100 

 choose DC-coupled FM.

An asterisk next to the key label indicates that external FM is active
and 

is displayed on the message line.

For synthesizers without Option 002, see FM 

 

AC and

 

DC.

FM:SOURce 
FM:SENSitivity 

 

FM:STATe 

Analyzer: 

 function on, 

 function off

 

 also see “FM” and “Modulation”.