HP (Hewlett-Packard) 8360 ユーザーズマニュアル

Leveling Point

Module

ALC

1

This 

 lets you set the synthesizer to level at the output of an

HP 

 series millimeter-wave source module. All models of the

HP 8360 series synthesized sweepers drive mm-wave source modules.
High power models of HP 8360 drive the mm-wave source modules
directly and to specified power levels. An HP 

 power amplifier

is needed in other configurations. The source module interface
multi-pin connector provides the communication path between the

synthesizer and mm-wave source module. An asterisk next to the key

label indicates that this feature is active.

SCPI: 

POWer:ALC[:SOURce] 

Analyzer: 

 CONNECTORS

“Externally Leveling the Synthesizer,” in Chapter 1.

Leveling Point

ALC

1

This 

 lets you set the synthesizer to level at the power

sensor of an external power meter. This mode of operation requires
a feedback connection from the power meter to the EXT ALC
BNC located on the synthesizer. An asterisk next to the key label

indicates that this feature is active.

SCPI: 

POWer:ALC[:SOURce] 

Analyzer: 

 CONNECTORS

“Externally Leveling the Synthesizer,” in Chapter 1.