HP (Hewlett-Packard) 8360 ユーザーズマニュアル

The HP 8360 series synthesized sweepers are designed to be, in all
but very few cases, a complete feature 

 of the HP 

synthesized sweepers. The most notable omissions are that the
HP 8360 series does not accept:

n 

line triggers (ie 50 or 60 Hz line frequency)

n 

an external leveling input from positive diode detectors

The HP 8360 series uses a 

 menu driven approach toward

accessing instrument functions versus a front panel key or shift key
sequence as with the HP 

Instrument Preset Conditions. The factory defined preset conditions

for the HP 8360 series are identical to those for the HP 

The HP 8360 series also allows you to define a different set of preset
conditions. Refer to “Changing the Preset Parameters,” in Chapter 1

for examples and more information. Table 3-6 illustrates the factory
instrument preset conditions for the HP 8360 series and the HP

 An instrument preset turns off all the functions and then

sets the following:

Sweep Mode

Full Span

Sweep

Continuous/Auto

Trigger

Free Run

Markers

All Off

Modulation

Off

 

 

 Size

10% of span

Status Bytes

Cleared

Leveling

Internal

RF Output

On

Power Level

0 

Power Step Size

10 

Power Sweep/Slope

0 

Storage Registers

Retain current values

HP-IB Address

Retains current value

Status Byte Mask

Unchanged

Extended Status Byte Mask Unchanged

Language Mode

Unchanged