Multiquip MTX80SD ユーザーズマニュアル

ページ / 58
 MTX80SD RaMMeR • opeRaTion anD paRTS Manual — Rev. #0 (07/20/12) — page 9
safety infOrMatiOn
TRanSpoRTing SaFeTy
  CauTion
 
„
NEvER allow any person or animal to stand underneath 
the equipment while lifting.
  NOTICE
 
„
Before lifting, make sure that the equipment parts (hook 
and vibration insulator) are not damaged and screws are 
not loose or missing.
 
„
Always  make  sure  crane  or  lifting  device  has  been 
properly  secured  to  the  lifting  bail  (hook)  of  the 
equipment.
 
„
alWayS shutdown engine before transporting.
 
„
neveR lift the equipment while the engine is running.
 
„
Tighten fuel tank cap securely and close fuel cock to 
prevent fuel from spilling.
 
„
Use adequate lifting cable (wire or rope) of suffi cient 
strength.
 
„
Use  one  point  suspension  hook  and  lift  straight 
upwards.
 
„
Do noT lift machine to unnecessary heights.
 
„
alWayS  tie  down  equipment  during  transport  by 
securing the equipment with rope. 
 
„
Never allow any person or animal to stand underneath the 
equipment while lifting.
enviRonMenTal SaFeTy
  NOTICE
 
„
Dispose  of  hazardous  waste  properly. 
Examples of potentially hazardous waste 
are used motor oil, fuel and fuel fi lters.
 
„
Do noT use food or plastic containers to dispose of 
hazardous waste.
 
„
Do noT pour waste, oil or fuel directly onto the ground, 
down a drain or into any water source.