Fluke 41B ユーザーズマニュアル
vi
•
When using the voltage test leads, keep your fingers away from the probe
contacts. Keep your fingers behind the finger guards on the probes.
contacts. Keep your fingers behind the finger guards on the probes.
•
Use caution when measuring above 60V-dc or 30V-ac rms. Such voltages
pose a shock hazard.
pose a shock hazard.
AC Current Probe Safety Guidelines
Follow these safety guidelines when using the AC Current Probe:
•
!
Never use the 80i-500s current probe on circuits rated higher than
600V. Use extreme caution when clamping the current probe around un-
insulated conductors or bus bars.
insulated conductors or bus bars.
•
Keep your fingers behind the finger guard on the 80i-500s.
•
Check the magnetic mating surfaces of the probe jaws; these should be
free of dirt, dust, rust, or other foreign matter.
free of dirt, dust, rust, or other foreign matter.
•
Do not use a current probe that has been cracked or damaged or has de-
fective leads. If there is any such sign of impaired operation, tape the
probe shut to prevent operation.
fective leads. If there is any such sign of impaired operation, tape the
probe shut to prevent operation.
•
The 80i-500s has been designed and tested according to IEC 1010-1:1992
and other safety standards. Follow all warnings to ensure safe operation.
and other safety standards. Follow all warnings to ensure safe operation.