Chicago Electric 45252 ユーザーズマニュアル

Page 9

Item 45252 

        

1.  Designate a work area that is clean and well-

lit.  The work area must not allow access by 

children or pets to prevent distraction and injury.

2.  Route the power cord along a safe route to reach 

the work area without creating a tripping hazard or 

exposing the power cord to possible damage.  The 

power cord must reach the work area with enough 

extra length to allow free movement while working.

3.  Secure loose workpieces using a vise or clamps 

(not included) to prevent movement while working.

4.  There must not be objects, such as utility lines, 

nearby that will present a hazard while working.

The Impact Wrench is equipped with a rocker-type 

Trigger that can switch between clockwise (forward) 

rotation to counterclockwise (reverse) rotation.

1.  Press the desired Socket (sold 

separately) onto the Anvil.

2.  Plug the Power Cord into a 

120V~ / 60Hz grounded outlet.

3.  Press the LOWER part of the Trigger for clockwise 

(FORWARD) rotation or the UPPER part of the 

Trigger for counterclockwise (REVERSE) rotation.

note: The Trigger will not activate if both settings are 

pressed down at the same time. 

 

CautiOn! To prevent injury: Use both hands to operate 

the Impact Wrench, keeping one hand on the Handle 

and the other hand on the Housing.  Do not hold or touch 

impact sockets during use.   

4.  When finished, release the Trigger.

note: The amount of actual torque may vary 

depending on the condition of the threads and 

other factors. If tightening critical components, 

check the actual torque applied to the fastener with 

a mechanical torque wrench (not supplied).

5.  To prevent accidents, turn off the tool and 

disconnect its power supply after use.  Clean, then 

store the tool indoors out of children’s reach.