Heath Zenith 52-4473-6 ユーザーズマニュアル

598-1286-01

Wiring

instaLLatiOn

For best performance, mount the fixture about 6 feet (1.8

m) above the ground.

1. Remove two decorative nuts.

2. Remove X-Bar.

3. Tighten mounting screws on X-Bar finger tight.

4. Attach X-Bar to junction box.

Junction Box

X-Bar

Decorative Nut

Lantern

Lantern Mounting

Screw

X-Bar

One Motion Light

Two Motion Lights

cautiOn: DO nOt connect the reD wire unless

you want to control other lights from the motion

sensor (see Optional Wiring).

Note:

All wiring must be run in accordance with the

Canadian Electrical Code through conduit or another

acceptable means. Contact a qualified electrician if there

is any question as to the suitability of the system.

Warning: turn power off at circuit breaker

or fuse.

Bracket Mounting

Screw

Connect the fixture wires to the wires in the junction

box. Twist the wires together and secure with wire con-

nectors.

Note:

We recommend having an assistant help hold the

lantern assembly during the wiring process.

Black

White

Green or

Bare

Black

White

Green or

Bare