Lightolier C4P20MHGA プリント
Calculite
®
HID Adjustable Accent
C4P20MHGA
Page 1 of 2
4 1/2" Aperture, PAR20 Ceramic Metal Halide, Glasslite
Job Information
Type:
Job Name:
Cat. No.:
Cat. No.:
Lamp(s):
Notes:
Notes:
Lightolier
a Genlyte Thomas Company
www.lightolier.com
631 Airport Road, Fall River, MA 02720 • (508) 679-8131 • Fax (508) 674-4710
We reserve the right to change details of design, materials and finish.
© 2004 Genlyte Thomas Group LLC (Lightolier Division) • A0504
We reserve the right to change details of design, materials and finish.
© 2004 Genlyte Thomas Group LLC (Lightolier Division) • A0504
Features
1. Glasslite Trim: One piece borosilicate glass with integral flange, etched
interior and white ceramic coated exterior. Etched white cone finish emits
a subtle glow. Hinged, and snaps onto lamp-holder assembly for easy
tool-less installation.
a subtle glow. Hinged, and snaps onto lamp-holder assembly for easy
tool-less installation.
2. Lamp Holder / Trim Adjustment Assembly: Unitized optics insure
alignment of lamp and aperture cone regardless of ceiling thickness. Provides
35° vertical tilt, 360°+ horizontal rotation; lockable. Patented EZ-Aim Helical
Drive System provides fast and accurate hot aiming with Philips screwdriver.
35° vertical tilt, 360°+ horizontal rotation; lockable. Patented EZ-Aim Helical
Drive System provides fast and accurate hot aiming with Philips screwdriver.
3. Socket: Medium base porcelain pulse rated socket with nickel plated
screwshell. Unitized construction assures proper alignment of lamp to
optics for consistent optical performance.
optics for consistent optical performance.
4. Frame Housing: Steel, 0.029" (22-Ga.), matte black finish.
5. Frame Vertical Adjustment Mechanism: Accommodates mounting to
5. Frame Vertical Adjustment Mechanism: Accommodates mounting to
virtually any ceiling system using pre-installed mounting bars, or 1/2" EMT
tubing (by others). Single locking feature secures all adjustments. Alignment
holes and markings allow fixture to be pre-set prior to installation. Final
adjustment can be made from below from inside fixture.
tubing (by others). Single locking feature secures all adjustments. Alignment
holes and markings allow fixture to be pre-set prior to installation. Final
adjustment can be made from below from inside fixture.
6. Mounting Bars: Galvanized steel, 0.048" (18-ga.), pre-installed telescoping
bars extend to 30" long and lock securely into position. Built-in locking
tabs provide positive attachment to common T-bar systems. Self-centering
feature simplifies installation in 24" O.C. grid systems. Attaches to steel or
wood joists without accessories.
tabs provide positive attachment to common T-bar systems. Self-centering
feature simplifies installation in 24" O.C. grid systems. Attaches to steel or
wood joists without accessories.
7. Retention Springs: Rust resistant springs secure trim for quick, tool-less
installation.
8. Ballast / Cover Assembly: Accessible from below and removable without
tools for inspection and ballast replacement .
9. Junction Box: 0.059" (16-ga.) galvanized steel. UL listed for 8 No. 12 AWG,
90°C through branch circuit conductors. Allows inspection from below.
10. Optional Accessory Holder: Catalog # CAH4. Sold separately; die-formed
steel, matte black finish, slide-in installation. Accepts up to two 3
3
⁄
4
" dia. media.
11. Thermal Protector: (Not Shown) Meets NEC and UL requirements. Do not
install insulation above nor within 3" (76mm) of any part of the luminaire.
Electrical
Electronic Ballast: 120V or 277V, 50/60 Hz. encased, high power factor, T.H.D.
<15%, thermally and transient protected, RMI/RFI complies with FCC part 18
non-consumer limits, shut-down circuit at end of lamp life, sound rating "A",
-5° F minimum starting temperature, Type 1 Outdoor rating.
<15%, thermally and transient protected, RMI/RFI complies with FCC part 18
non-consumer limits, shut-down circuit at end of lamp life, sound rating "A",
-5° F minimum starting temperature, Type 1 Outdoor rating.
Ballast
ANSI Code
Voltage
Max. Amps
Input Watts
39W MH
M130
120/277
0.39/0.17
44
Options and Accessories
CAH4: Accessory holder accepts up to two 3
3
⁄
4
” dia. media.
Chicago Plenum: Consult Factory.
Labels
UL (suitable for wet locations), I.B.E.W.
Ceiling Cutout: 5 1/8" (130mm) Dia.
Glasslite Trim
Frame-In Kit
Lamp
C4P20MHGA
Etched glass with matching flange.
C4A39P20E1 Electronic 120V
39W PAR20 Ceramic MH
C4A39P20E2 Electronic 277V
39W PAR20 Ceramic MH