Electrolux 318205319 ユーザーズマニュアル

Position 1 can only be used with a regular “non-

sliding” rack.

The  ovens  are  vented  above  their  door.  When 

the  oven  is  on,  warm  air  is  released  through  the 

vents.  This  venting  is  necessary  for  proper  air 

circulation  in  the  oven  and  good  baking  results.

This oven is equipped with ladder rack supports with 

8 positions to accommodate precisely every mode 

of cooking. 

To install oven rack support, insert the supports by 

pushing them downward into the two brackets on 

each side of the oven interior, as shown below. 
To remove the oven rack support for a self-clean 

cycle, pull up the support to disengage them from 

the brackets. If the rack supports are not removed, 

the self-clean cycle won’t start.