Zenoah BC2001 ユーザーズマニュアル
English
Français
6. Set up
6. Assemblage
26
■ INSTALLING HANDLE
• Mount the handle to the shaft tube and
• Mount the handle to the shaft tube and
clamp it at a location that is comfortable
to you. (SE1)
to you. (SE1)
■ INSTALLING DEBRIS GUARD
• Put the debris guard on the gear box,
• Put the debris guard on the gear box,
attach it with the screws and hardware
provided. (SE2)
provided. (SE2)
■ INSTALLING CUTTING HEAD (SE3)
1. While locking the gear shaft by inserting
1. While locking the gear shaft by inserting
the supplied tool into the upper holder
on the gear box, loosen and remove the
nut (left-handed).
on the gear box, loosen and remove the
nut (left-handed).
2. Fit the line head assembly to the gear
shaft over the holders. Hand-tighten it
securely.
securely.
■ MISE EN PLACE DE LA POIGNEE
• Monter la poignée sur le bras de
• Monter la poignée sur le bras de
l'appareil et la positionner pour avoir
une prise confortable et sûre (SE1).
une prise confortable et sûre (SE1).
■ MISE EN PLACE DU CACHE ANTI-
PROJECTION
• Mettre en place le cache anti-projection
sur le carter du renvoi d’angle et le fixer
à l’aide de vis avec la machine (SE2).
à l’aide de vis avec la machine (SE2).
■ INSTALLATION DE LA TETE DE
COUPE (SE3)
1. Tout en bloquant l’arbre d’entraînement
à l’aide de la tige fournie avec la
machine en la plaçant dans le carter,
desserrer et retirer le boulon (pas à
gauche).
machine en la plaçant dans le carter,
desserrer et retirer le boulon (pas à
gauche).
2. La vis de la lame dépasse des
supports. Serrez-la à fond
manuellement.
manuellement.
SE1
SE2
SE3