Electrolux 5041 ユーザーズマニュアル
5
Your dishwasher in day-to-day use
●
Never operate your dishwasher if the electrical supply lead, inlet hose or drain
hose, control panel, worktop or plinth are damaged.
hose, control panel, worktop or plinth are damaged.
●
If there is a fault, first turn the water tap off. Then switch off your machine and
pull the plug out of the socket. If there is a fixed connection, switch off or
unscrew the fuse(s).
pull the plug out of the socket. If there is a fixed connection, switch off or
unscrew the fuse(s).
●
Never pull the plug out of the socket by the cable - always hold the plug.
●
Dishwasher repairs should only be performed by trained personnel.
Improper repairs may seriously endanger the user. If your dishwasher needs to be
repaired, you should contact your local AEG Service Force Centre or your retailer.
Improper repairs may seriously endanger the user. If your dishwasher needs to be
repaired, you should contact your local AEG Service Force Centre or your retailer.
●
Never place any solvents in your dishwasher or you may cause an explosion!
●
Do not rest or sit on the open door as the machine could tilt.
●
Before using special dishwasher salt, detergent or rinse-aid, make sure that the
manufacturer of these products expressly specifies their use in domestic
dishwashers.
manufacturer of these products expressly specifies their use in domestic
dishwashers.
●
Always turn off the water tap when your dishwasher is left unattended for any
length of time, e.g. when you are away on holiday.
length of time, e.g. when you are away on holiday.
●
Only transport the dishwasher in an upright position. Tipping it upside down
during transport could cause salty water to leak into the internal compartment
and lead to the formation of rust.
during transport could cause salty water to leak into the internal compartment
and lead to the formation of rust.
152976 17/1 15-09-2001 9:10 Pagina 5