Electrolux LS6 ユーザーズマニュアル
16
• BLUE rack for glasses: the glasses should be placed
upside down.
Figure 16
D4
END OF WORK AND DAILY CLEANING
The appliance is designed to carry out an automatic
cleaning cycle to help flush out any residues and to
guarantee greater health and hygiene:
• Open the door and take out the rack containing the
cleaning cycle to help flush out any residues and to
guarantee greater health and hygiene:
• Open the door and take out the rack containing the
clean dishes.
• Remove the tank filters and the overflow “W”.
Figure 17
• Close the door.
• Select the drain cycle by pressing “B” button
• Select the drain cycle by pressing “B” button
The message "CLE" ("CLEAN") will be displayed
throughout the drain cycle:
throughout the drain cycle:
• After a few minutes, 3 beeps indicate the end of the
cleaning cycle and “END” blinks on the display:
• Switch off the dishwasher by pressing “A” button
• Switch unit off at the main circuit breaker.
• Close the water shutoff valve.
• Replace the filters and the overflow.
• Close the water shutoff valve.
• Replace the filters and the overflow.
• Remove the top and bottom jets “F” and “I”,
unscrewing the ring nut “H”.
Figure 18
• Unscrew plugs “L” from the rinse jets and clean using
a water spray. Do not use sharp implements to clean
the nozzle holes, which could otherwise be damaged.
the nozzle holes, which could otherwise be damaged.
• Remove filters “C” and “D” and clean them under a
water spray.
• Remove the filter “Z” and clean away any stuck on
food in order to avoid blocking the draining system.
Figure 19
Upon completion of cleaning operations, replace the
parts removed previously.
parts removed previously.
Cleaning the exterior surfaces
Before carrying out any cleaning operations, turn off the
power at the main circuit breaker.
Clean the stainless steel surfaces using warm soapy
water; never use detergents containing abrasive sub-
stances nor steel scrapers, common wire wool, brushes
or scrapers; rinse thoroughly using a wet cloth and care-
fully wipe dry. Clean the control panel using a soft damp
cloth and a neutral detergent if necessary.
Do not wash the appliance using direct or high-pressure
water jets. To reduce the emission of pollutants into the
environment, clean the appliance (externally and where
necessary internally) with products having a biodegrada-
bility of over 90%).
CAUTION: Never stand or sit on the door, do not place
heavy boxes or crates on the door.
Before carrying out any cleaning operations, turn off the
power at the main circuit breaker.
Clean the stainless steel surfaces using warm soapy
water; never use detergents containing abrasive sub-
stances nor steel scrapers, common wire wool, brushes
or scrapers; rinse thoroughly using a wet cloth and care-
fully wipe dry. Clean the control panel using a soft damp
cloth and a neutral detergent if necessary.
Do not wash the appliance using direct or high-pressure
water jets. To reduce the emission of pollutants into the
environment, clean the appliance (externally and where
necessary internally) with products having a biodegrada-
bility of over 90%).
CAUTION: Never stand or sit on the door, do not place
heavy boxes or crates on the door.
W
CLE
End
H
F
I
L
C
D
Z
1
2