Electrolux WT30H240WS ユーザーズマニュアル

ページ / 18
ENGLISH
11
- Check for obstruction on the waste outlet pipe and 
the overflow aperture.
 TANK WATER LEVEL TOO HIGH
- Check for obstruction on the waste outlet pipe and 
the overflow aperture.
 CALL THE AUTHORIZED SERVICE CENTER
 CALL THE AUTHORIZED SERVICE CENTER
- The appliance continues to operate, but appropriate 
checks by an authorized technician are recommen-
ded.
C4
DETERGENT/RINSE-AID DISPENSERS AND 
SETTINGS
If the appliance is connected to a water softener or 
osmotic device, contact the detergent supplier for the 
specific product.
Peristaltic dispensers (rinse-aid and detergent) require 
periodic maintenance. The internal hose of the rinse-aid 
dispenser should undergo periodic maintenance (at 
least once or twice a year).
1. Dishwasher with incorporated detergent dispen-
Pump “R” dispenses about 0.021 oz per second /0.6 g 
per second of detergent. When the appliance is filled 
with water for the first time in the day, it dispenses 
1.058oz/30g of detergent in 50 sec., thereby providing a 
concentration of 0.046 oz per quart/1.3 g per liter. Pump 
“R” dispenses 0.126 oz/3.6 g in 6 sec. at each cycle.
Dispenser operating time may be changed, following the 
instructions given in the next paragraph.
Insert the hose provided in the kit into the detergent con-
tainer.
2. Dishwashers with incorporated peristaltic rinse-
aid dispenser pump (Figure 11).
Pump “S” dispenses about 0.0046 oz per second/0.13 g 
per second of rinse-aid. It dispenses 0.014 oz/0.39 g in 3 
sec. at each rinse.
Dispenser operating time may be changed, following the 
instructions given in the next paragraph.
Insert the hose provided in the kit into the rinse-aid con-
tainer .
Connections for automatic detergent dispenser 
(Figure 11)
Figure 11
There is a ready-made impression “N” (inside 
dishwasher chamber floor) to be perforated 
(5/16”dia/8mm) for positioning the detergent concentra-
tion measuring sensor.
Inside the tank there is a hole “P” (3/8”dia/10mm) closed 
with a plug, which may be used for mounting a liquid 
detergent injector.
The sensor and liquid detergent injector should be instal-
led without compromising the watertightness of the 
appliance.
Electrical connections for automatic detergent and 
rinse-aid dispensers.
Terminals are available on the power supply terminal 
box for the electrical connection of external dispensers 
working at 208V or 240V. Max. power 30 VA.
Figure 12
Connect the detergent dispenser between terminals 7 
and 9. These connection points are live for a set time 
during filling of the tank and at the start of the wash cycle 
(see paragraph “Setting the dispensers”).
B2
C1..C8
E1..E8
S
R
N
P
L1
L2
L3