Electrolux LS14 ユーザーズマニュアル

10

have a cross section of AWG 6/13,3 mm

2

. Do not use 

the wiring conduit or other piping for ground connec-
tions. If necessary, have the electrician supply the 
ground wire.

Open the power supply terminal box and insert the jum-
pers provided as follows: one jumper between terminals 1 
and 2, one between terminals 3 and 4 and another 
between terminals 5 and 6.  Using a suitable power sup-
ply cable, connect  the three phases to terminals 1, 3, 5, 
and the earth wire to the terminal  

.

This appliance is designed for an external energy con-
sumption control.

Connect the energy peak controller across terminals 11 
and 12.

•

An automatic resettable thermally protectived device 
incorporated in the windings of the electric pump cuts 
off the electricity supply in the case of malfunctioning. 

•

In the event of water mains failure, a back-flow 
device prevents water in the boiler from returning into 
the mains.

•

An overflow pipe, connected to the drainage outlet, 
maintains the water in the tank at a constant level.

•

On models with a drain pump, a supplementary level 
control device activates if the main level control 
device is faulty.

-

Check that the shutoff valve is open

-

Check that the water inlet filter is clean

-

Check the minimum main pressure is not less than 
7.25 psi/50kPa 

-

Check that the overflow pipe is inserted

-

Check if the overflow has been removed.

-

Check for obstruction on the waste outlet pipe and 
the overflow aperture.

-

Check for obstruction on the waste outlet pipe and 
the overflow aperture.

-

The appliance continues to operate, but appropriate 
checks by an authorized technician are recommen-
ded.

If the appliance is connected to a water softener or 
osmotic device, contact the detergent supplier for the 
specific product.

Peristaltic dispensers (rinse-aid and detergent) require 
periodic maintenance. The internal hose of the rinse-aid 
dispenser should undergo periodic maintenance (at 
least once or twice a year).