Electrolux 200 ユーザーズマニュアル

The 

 or 

 pad is used to set the clock. The clock may be set for 12 or 24 hour time of

day operation. The clock is preset at the factory for the 12 hour operation. When the wall
oven is first plugged in or when the power supply to the wall oven has been interrupted, the
display will flash with "PF" (power failure, See Figure 1).

When "PF" appears in the display, press 

 or 

. A beep will sound and "PF" will

disappear.

1.

Press 

 or 

. "CLO" anf the current time of day will appear in the

display (Figure 2).

2.

Press 

 

 

 pads to set the time of day to 1:30 (Figure 3).

Press 

. The time of day will appear in the display (Figure 4).

1.

Press and hold 

 or 

 for 6 seconds (Figure 3). "CLO" and the

current time of day will appear in the display (Figure 4). A beep will
sound and "12h" (Figure 5) or "24h" (Figure 6) will appear in the
display.

3.

Press 

 or 

 to switch between the 12 and 24 hour time of day

display. The display will show either "12h" (Figure 5) or "24h" (Figure
6).

4.

Press 

 to accept the change or press 

 or 

 to reject the

change.

5.

Reset the correct time as described in To set the Clock above.
Please note that if the 24 hour time of day mode was chosen, the
clock will now display time from 0:00 through 23:59 hours.