Electrolux 152981 73/0 ユーザーズマニュアル
4
Filling with salt
Attention!
Only use salt specifically designed for use in
dishwashers.
All other types of salt not specifically designed
for use in dishwasher, especially table salt, will
damage the water softener.
Only fill with salt just before starting a washing
programme (not the Rinse and Hold programme).
This will prevent any grains of salt or salty water,
which may have been spilled, remaining on the
bottom of the machine, which may cause
corrosion.
Only use salt specifically designed for use in
dishwashers.
All other types of salt not specifically designed
for use in dishwasher, especially table salt, will
damage the water softener.
Only fill with salt just before starting a washing
programme (not the Rinse and Hold programme).
This will prevent any grains of salt or salty water,
which may have been spilled, remaining on the
bottom of the machine, which may cause
corrosion.
The salt container will require topping up periodically.
According to the model, an indicator reminds you when
filling with salt:
filling with salt:
A) The salt cap has a refill indicator window in the centre.
A green float is clearly visible when there is salt inside
the container, and almost disappears when the salt has
finished reminding you to add salt.
the container, and almost disappears when the salt has
finished reminding you to add salt.
B) A salt indicator light on the control panel will come on
when the salt has finished.
The salt indicator light on the control panel can
remain illuminated for 2-6 hours after the salt has
been replenished, assuming the dishwasher
remains switched on. If you are using salts that
take longer to dissolve then this can take longer.
The function of the machine is not affected..
remain illuminated for 2-6 hours after the salt has
been replenished, assuming the dishwasher
remains switched on. If you are using salts that
take longer to dissolve then this can take longer.
The function of the machine is not affected..
Do not worry if water over flows from the unit when filling
with salt, this is quite normal.
with salt, this is quite normal.
SR15
SR19
SR16
SR18
SR17
1. Unscrew the cap of the salt container.
2. Pour 1 litre of water inside the container
(this is necessary only before filling with
salt for the first time).
salt for the first time).
3. Using the funnel provided, pour in the salt
until the container is full.
4. Remove any trace of salt on the screw thread
or on the gasket.
5. Screw on the cap tightly.
SR11