Blue Coat Systems SGOS Version 5.2.2 ユーザーズマニュアル
33
Chapter 3: Maintaining the SG Appliance
This chapter describes how to maintain the SG
appliance; for example, restarting the
appliance, restoring system defaults, upgrading the appliance, and reinitializing disks.
This chapter contains the following sections:
❐
❐
❐
❐
❐
❐
❐
❐
❐
❐
Restarting the SG Appliance
The restart options control the restart attributes of the SG appliance if a restart is
required because of a system fault.
required because of a system fault.
Hardware and Software Restart Options
The Restart settings determine if the SG appliance does a faster software-only restart, or
a more comprehensive hardware and software restart. The latter can take several
minutes longer, depending upon the amount of memory and number of disk drives in
the appliance.
a more comprehensive hardware and software restart. The latter can take several
minutes longer, depending upon the amount of memory and number of disk drives in
the appliance.
The default setting of
Software only
suits most situations. Restarting both the hardware
and software is recommended in situations where a hardware fault is suspected.
For information about the Core Image settings, see
To restart the SG appliance:
1.
Select
Maintenance > System and disks > Tasks
.
Important:
The default settings of the Restart option suits most systems. Changing
them without assistance from Blue Coat Systems Technical Support is not
recommended.
recommended.
Note:
If you change restart option settings and you want them to apply to the next SG
appliance restart, click
Apply
.