Smeg CIR60XS ユーザーズマニュアル

 

 

 
Connection to the gas mains may be made with a rigid copper pipe or 
with a flexible pipe and conforming to the provisions defined by standard 
regulations in force.  
To facilitate connection, fitting A on the rear of the appliance may be 
adjusted laterally. For this purpose, loosen hexagon nut B, turn fitting A 
to the desired position, and retighten hexagon nut B (tightness is ensured 
by a biconical brass ring). Use a soapy solution to check for proper 
tightness. Never use a free flame.  
The hob has been inspected for G20 (2H) natural gas at a pressure of 
20 mbar. For use with other types of gases, see Section “6. 
ADAPTATION TO DIFFERENT TYPES OF GAS”. The gas intake fitting 
is ½” gas external threaded (ISO 228-1). 
 

 
 

Connection with rigid copper pipe: 
the connection to the gas mains must 
not provoke stress of any kind on the 
hob.  
Connection may be made by using 
biconical adapter D with insertion of 
gasket C (supplied). 
 
 
 
Connection with flexible pipe: use 
only flexible pipes conforming to 
standard regulations in force, inserting 
gasket  C (supplied) between fitting A 
and flexible pipe E.