Vulcan-Hart GTS12-2 ユーザーズマニュアル

 

- 

20

 - 

  The griddle and its 

1. Clean off platen using soft cloth, water 
    and mild soap solution. 
 
2. Slide the Teflon bracket (#944503) into 
    the sleeve of the Teflon sheet as shown in  
    fig. 20. 
 
4. Raise the platen to the 47° locked 
    position. Drape the Teflon sheet  
    (#944505) from the right side of the 
    platen by hooking the front and back of 
    the Teflon bracket to the Teflon retaining 
    pins.  See fig. 21. 
 
5. Pull the Teflon sheet from the right side 
    around the face of the platen cooking 
    surface to the left side. 
 
6. Pull the Teflon sheet tight and ensure the 

cooking surface of the platen is   completely 
covered by the Teflon sheet. 
 

7. Secure the Teflon sheet to the left side of  

the platen with the two Teflon clips 

 

 

(#944504). See fig. 22. 

 

 GTS12 units that were shipped 

before March 2013 utilize a different Teflon sheet 
(#498852-1) and mounting system (two bars 
#498852-2 and three springs 498852-3). 
 
 
 
CARE AND CLEANING OF TEFLON WRAP 
 
1. In between cooking runs and during idle 
    Periods, the Teflon sheet should be wiped  
    off with water and a clean soft cloth. 
 
2. After each day the Teflon sheet should be  
    removed from the platen(s), disassembled 
    and placed in water with mild soap 
    solution (no abrasive or harsh chemical 
    cleaners should be used). Gently wash  
    both sides of the Teflon sheet and the  
    hardware with the soft clean cloth in the 
    mild soap solution.