Viking F20518A ユーザーズマニュアル
25
Final Preparation
1. Some stainless steel parts may have a
plastic protective wrap, which must be
peeled off. All stainless steel body parts
should be wiped with hot soapy water
and with liquid cleaner designed for this
material. If build-up occurs, do not use
steel wool, abrasive cloths, cleaners or
powders! If it is necessary to scrape
stainless steel to remove encrusted
materials, soak with hot, wet cloths to
loosen the material, then use a wood or
nylon scraper. DO NOT use a metal knife,
spatula, or any other metal tool to scrape
stainless steel! Scratches are almost
impossible to remove.
peeled off. All stainless steel body parts
should be wiped with hot soapy water
and with liquid cleaner designed for this
material. If build-up occurs, do not use
steel wool, abrasive cloths, cleaners or
powders! If it is necessary to scrape
stainless steel to remove encrusted
materials, soak with hot, wet cloths to
loosen the material, then use a wood or
nylon scraper. DO NOT use a metal knife,
spatula, or any other metal tool to scrape
stainless steel! Scratches are almost
impossible to remove.
2. The interior of the oven should be washed
thoroughly with hot, soapy water to
remove film residues and installation
debris before being used for food
preparation, then rinsed and wiped dry.
Solutions stronger than soapy water are
rarely needed.
remove film residues and installation
debris before being used for food
preparation, then rinsed and wiped dry.
Solutions stronger than soapy water are
rarely needed.
24
Optional Center Trim Installation (36”W. Double)
o
p
t
io
n
1
o
p
t
io
n
2
Install mounting brackets.
Insert center trim piece over mounting brackets.
1
3
1
2
2
Place door onto hinge arms.
Pull door stops up and slowly slide door down.
Door Replacement & Adjustment (36”W.)
Note: With purchase of DCT-VGSO-SS center trim kit.