Dacor RR30NFS ユーザーズマニュアル

ページ / 5
All specifications subject to change without notice.
Phone: (800) 793-0093
www.dacor.com
PLANNING
GUIDE
RR30NS, RR30NFS, RR30NIS, RR30NIFS
Renaissance
 
30” Wide  
Electric Inductive Range
Document # PG05-009
Revised 05/23/13   Page 2/5
Electrical Specifications
10
”(
25
.4
cm)
10
”(
25
.4
cm)
12” (30.5 cm)
2 1/2”
(6.4 cm)
3 1/2”
(8.9 cm)
1” (2.5 cm)
UtILIty cLEARANcE bEhIND RANGE
NEmA 14-50P PLUG
NEmA 14-50R REcEPtAcLE
ELECTriCaL rEQUirEMEnTS
Electrical Circuit 
required
Total Connected 
Load**
 240 Vac 60 Hz, 4 wire*,  
50 Amp.
11.5 kW (48.0 Amp.)
*Two 120 Vac hot (L1 and L2), one neutral (N1) and one ground.
**This information above is for reference only. If the above data 
does not agree with the product data label, use the data on the 
product data label.
iMPOrTanT: Models with -C option suffix are ranges that 
come with a factory installed 4-wire appliance cord with NEMA 
14-50P plug. For freestanding ranges installed in Canada, a 
factory installed 4-wire appliance cord with NEMA 14-50P plug 
is required, without modification. For slide-in ranges installed in 
Canada and all ranges installed outside of Canada, the 4-wire 
appliance cord configuration (-C type) is optional and may be 
utilized where local codes permit The plug is designed to plug 
directly into a NEMA 14-50R electrical receptacle installed by a 
licensed electrician according to the above specifications.
Factory wiring
Model
Factory Electrical Connection
RR30NS, 
RR30NFS
Power cord not installed. Not for installation in Canada.
RR30NS-C, 
RR30NFS-C
Cord connected, for installation in Canada (and U.S.A., 
where local codes permit).
RR30NIS, 
RR30NIFS
No power cord. May be installed in Canada and U.S.A.
RR30NIS-C, 
RR30NIFS-C
Cord connected, may be installed in Canada and U.S.A., 
where local codes permit.
Cabinet face
Countertop
Range trim resting
on countertop
RR30NI[F]S range
3/8” min. (1.0 cm)
flat countertop
overhang
27 9/16” (70.0 cm)
ERV30[15]
raised vent
3/8” min. (1.0 cm) space
required behind ERV30[15]
chassis to clear stiffener
ATKR30SR
trim kit
installed
Cabinet face
Countertop
Range trim resting
on countertop
Back of
side panel
rests against
cabinet face
RR30NI[F]S range
3/8” min. (1.0 cm)
flat countertop
overhang
ATKR30SR
trim kit
installed
27 9/16” (70.0 cm)
3 inch
side panel
ERV30[15]
raised vent
3/8” min. (1.0 cm) space
required behind ERV30[15]
chassis to clear stiffener
Product Dimensions (cont.)
SIDE vIEW - DOWNDRAFt ERv30[15] WIth SLIDE-IN, SELF-
RImmING INStALLAtION WIth 3” SIDE PANELS REmOvED
SIDE vIEW - DOWNDRAFt ERv30[15] WIth SLIDE-IN, SELF-
RImmING INStALLAtION WIth 3” SIDE PANELS INStALLED